Untitled Document
Friday, 2017-02-24
Vanvex 190/295 Heat Pump

Scandinavian Homes Ltd. in Galway does not sell the Vanvex / Genvex micro heatpumps. Please contact Ecosystems Ireland.
The Vanvex domestic water heat pump is a complete unit containing a 185/290-litre hot water tank, extract fan, heat pump and electrical equipment, plus a heating coil ready for connection to a solar panel/central heating, etc.

Use
The Vanvex domestic water heat pump can utilise the energy of both indoor and outdoor air to heat domestic water and is able to supply a family's hot water needs throughout the year.

Output
The heat pump can produce approx. 380 l of hot water a day at a temperature of 55°C. Its capacity is dependent on the outside temperature, the temperature at which cold water is supplied and the pattern of water use.
If the tank is emptied of hot water, a 1kW electric element can be switched on to help heat the water up quickly again. Once the desired temperature has been reached, the electric element can be turned off again.

Dimensioned sketch


Design
Principal dimensions:
(h x l x d) ex. connecting pieces
Vanvex 190: 1449 x 600 x 664 mm
Vanvex 295: 1849 x 600 x 664 mm

Cabinet construction:
Fully enclosed with hot-galvanised plate. Tank insulated with PU foam. Exterior powder coated in white, RAL 9010.

Duct connection:
Ø 160 mm (nipple size) with rubber ring seal

Tank protection:
Enamelled on inside and magnesium anode

Condenser:
D-tube condenser wound on outside of tank. This prevents limescale from forming on the condenser.

Condesnation drain:
Plastic hose, Ø 15 mm (inside)

Weight without/with water:
Vanvex 190: 195/380 kg
Vanvex 295: 210/500 kg.

Use
The Vanvex domestic water heat pump can utilise the energy of both indoor and outdoor air to heat domestic water and is able to supply a family's hot water needs throughout the year.

Technical data

Power supply:

1 x 230 V + N + PE, 10 A, 50 Hz

Fan with direct drive motor:
R2E 190

Condenser:
2.0 uF

Motors 230 V AC:
Standard motors
IEC 38

Insulation class:
B

Protection class:
IP 44

RPM:
2500

Power input (max.):
58 W

Current drain (max.):
0.26 A

Air flow:
Half speed at 25 Pa external pressure loss - 135 m3/h
Full speed at 100 Pa external pressure loss - 280 m3/h

Compressor:
NE 6187Z
Power input (max.) 520 W
Current drain (max.) 3.0 A

Mean output 1230 W
Mean power consumption 370 W

Refrigerant:
R134A

Quantity:
1300 g

Electric heating element:
Power consumption 1.0 kW
Current drain 4.3 A

Tank capacity:
185/290 litres

No-load loss:
50 W/70 W

Max. working pressure:
10 bar

Surface area of heating coil:
0.8 m2

Sound


Control system
The system comes with an electronic control panel. The control panel is fitted on the front cover as standard, but can be supplied as a remote-control unit as an optional extra.

The domestic water temperature can be set to max. 55°C. The cooling surface is defrosted automatically.

Accessories
Filter top
In order to reduce fouling of the cooling surface and fan, the standard top can be replaced with a top with a built-in filter.

Untitled Document
 
Untitled Document